« BACK  

Magnets for the aerospace industry

Goudsmit designs and manufactures magnet assemblies for the aerospace industry that are lower in weight and perform better
Goudsmit designs and manufactures magnet assemblies for the aerospace industry that are lower in weight and perform better

LOWER WEIGHT, HIGHER PERFORMANCE
At the Airtec in Munich, the newly AS9100c certified Goudsmit Magnetics Group (stand A1-G93) will present a range of magnetic product solutions for the aerospace industry. The company designs, manufactures and supplies magnet systems and permanent magnets that are lower in weight than their predecessors and continue to perform optimally over the long term in the toughest conditions. Such magnet systems can be found in actuators, linear drives and electric motors, including those intended for the aerospace industry. Special software is also used to simulate and test whether the critical requirements for tensile forces, torques, field strength, temperature and sensor specifications are met. Weight reduction – which is always desirable for the aerospace industry – is made possible through the use of alternative magnet types with higher efficiency.

AS9100c
Having recently attained AS9100 certification, the company is now a qualified supplier to the aerospace/aviation industry. Since attaining ISO/TS 16949:2009 certification in 2008, Goudsmit has been a supplier to the automotive industry. Attaining the AS9100 certification was the next step. In addition to the aerospace and automotive industries, magnets are indispensable in the medical, greentech and oil & gas industries. The family business established in 1959 particularly distinguishes itself in the areas of magnetic measurements, quality control and product development.

MAGNET ASSEMBLIES
The company supplies the basic principles, data and knowledge for the design process of magnet assemblies. The company's embedded knowledge of the physical and mechanical properties of magnetic materials is employed from the earliest stages of design and is also called upon to suggest effective, lighter and cost-effective alternatives. This is achieved in part through the use of analytical methods for describing magnetic circuits, calculation methods for determining the required dimensions of permanent magnet circuits and two- or three-dimensional finite elements processes. The development of a completely new product that is to be delivered fully assembled and according to specifications is also among the possibilities.

PUBLISHED: 11 Aug 17 Bookmark and Share
Company:
Goudsmit Magnetics Group
Country:
Netherlands
Tel:
+31 40 221 3283
Fax:
+31 N/A
Email:
info@goudsmit.eu
Website:
www.goudsmitmagnets.com
Other News from Goudsmit Magnetics Group:

»
Magnetic power gripper handles heavy steel parts
»
Magnet filters iron particles as small as one micron from industrial fluids
»
Magnets for the aerospace industry
»
AS9100C certification for Goudsmit Magnetics
»
Powerful magnets help to prevent gaps and holes in steel walls and ceilings
»
Smooth conveying of sharp steel parts
»
Magnet for robot grippers
»
Demagnetization on location


Industry News:
Jonathan Moia joins Cable Tapes UK Ltd
Further expansion imminent at Cable Tapes UK as Jonathan Moia is taken on to drive the company to even higher levels!
Cable Tapes UK, UK
Cimteq Ltd has been awarded silver accreditation against the Investors in People Standard, demonstrating their commitment to high performance through good people management
Cimteq Ltd recognised as an Investor in People
Cimteq Ltd, UK
Northwire's <i>BioCompatic</i> extends biocompatibility compliance
Northwire's BioCompatic extends biocompatibility compliance
Northwire Inc, USA
Metalube launches new range of Lubricool™ at wire Düsseldorf. Image shows Lubricool™ selector chart
Metalube launches new range of Lubricool™ at wire Düsseldorf
Metalube Limited, UK
The recently developed magnetic power gripper grips plate material from 6 mm and is suitable for robot applications and as a lifting magnet
Magnetic power gripper handles heavy steel parts
Goudsmit Magnetics Group, Netherlands
Cable Tapes UK will be exhibiting at wire 2018, Düsseldorf
Cable Tapes UK at wire 2018, Düsseldorf
Cable Tapes UK, UK
Cable Tapes UK are delighted to announce the launch of their new website
Cable Tapes UK are delighted to announce the launch of their new website
Cable Tapes UK, UK
VICAFIL SL lubricant
Clean wires with CONDAT wet drawing lubricants
Condat SA, France
John Mainwaring - Senior Development Chemist
Metalube appoint Senior Development Chemist
Metalube Limited, UK
Metalube is making a big investment into the Düsseldorf show this year with the addition of the new stand at Tube 2018
Two stands for Metalube in Düsseldorf
Metalube Limited, UK
» VIEW ALL NEWS «