« BACK  

Mount Joy Wire announces hiring of process engineering manager and quality assistant

Left: Matt Graham - Process Engineering Manager; right: Adam Dent - Quality Assistant
Left: Matt Graham - Process Engineering Manager; right: Adam Dent - Quality Assistant

Mount Joy Wire, a leading U.S. manufacturer of specialty wire for many applications, has hired a new process engineering manager and a new quality assistant as part of its ongoing emphasis to add value to and ensure the quality of its products.

Matt Graham, York, is the new process engineering manager and will be responsible for processing and internal quality and supervising the company’s process control manager and environmental service technician. He reports to General Manager Jon Stine.

Adam Dent, Wrightsville, was hired as the new quality assistant and will be responsible for managing quality complaints and customer quality issues and supporting internal quality control. He reports to Quality Manager Ed Hollock.

Graham, who graduated from Millersville University in 2010 with a BS in chemistry and a minor in physics, previously worked at Mount Joy Wire for nearly six years until September 2015 as the environmental process engineer. He then served as interim quality manager and understudy for the process engineering manager's position until rejoining the company full-time in July,

Dent is also a Millersville alumnus, graduating with a BS in chemistry (3.83 GPA) in spring. There, he was a member of the university’s American Chemical Society student chapter and was awarded a Neimeyer-Hodgson grant to conduct collaborative research with ITT Engineered Valves, Lancaster. He also worked as a lab technician for Millersville and K&L Plating, Lancaster.

For more than 25 years, Mount Joy Wire has been a trusted leader in manufacturing specialty wire for a wide variety of applications, including aerospace, automotive, architectural, construction, marine, medical and oil and gas. Mount Joy Wire’s flagship music wire product, AmeriCoatTM, is known for its quality and resistance to material degradation. All of its core products - spring, brush and oil-tempered wire - are made in America at the Mount Joy, Pennsylvania headquarters.

PUBLISHED: 29 Aug 17 Bookmark and Share
Company:
Mount Joy Wire Corporation
Country:
USA
Tel:
+1 717 653 1461
Fax:
+1 717 653 0221
Email:
sales@mjwire.com
Website:
www.mjwire.com
Other News from Mount Joy Wire Corporation:

»
Mount Joy Wire announces hiring of process engineering manager and quality assistant
»
Mount Joy Wire Corporation announces four key management changes
»
Mount Joy Wire CFO Scott Badger serves as volunteer at Lancaster LPGA Open
»
Jon Stine promoted to General Manager of Mount Joy Wire Corporation
»
Jackson T. Edwards promoted to Mount Joy Wire's Director of Technical Services and Sales
»
Stanaway joins MJW at Spring World exhibition


Industry News:
David Lee will fully retire from Metalube in August 2018
Metalube bids farewell to David Lee
Metalube Limited, UK
Wire cleaned for decorative finish by PWC system
Wire green cleaning for plating and a decorative glossy finish
Decalub, France
Klaus Lenz - CEO of Ungerer Technology GmbH
Klaus LENZ has been appointed as the CEO of UNGERER Technology GmbH
Ungerer Technology GmbH, Germany
The cover page of
Digitized wire & cable manufacturing - The "NIEHOFF Magazine" 1/2018 is out now
Maschinenfabrik Niehoff GmbH & Co KG, Germany
Magnet assemblies can now be fabricated quickly and efficiently using a robot
Robot for magnet assemblies
Goudsmit Magnetics Group, Netherlands
From top: Multiwire drawing line type MMH 121 + RM 161; D 632 type double twist bunching machine; NPS double spooler type SV 402 D; 
Rotary braiding machine BMV 16 ; Rotary braiding machine BMV 16 (interior)
Digitization - Niehoff at wire 2018
Maschinenfabrik Niehoff GmbH & Co KG, Germany
The Strand Compaction Units are available for 2mm to 40mm strand diameters
Rope strand compaction gives Bar Products & Services a first quarter boost
Bar Products & Services Ltd, UK
Ridgway are manufacturers of precision taping and winding machines for the electrical and energy industries
Ridgway Machines moving forward and expanding
Ridgway Machines Ltd, UK
Wire & Plastic Machinery booth from Wire Expo 2016
Wire and Plastic Machinery at Wire Expo 2018
Wire & Plastic Machinery Corp, USA
Domino (Wiedenbach) will be showcasing intelligent coding and marking solutions at wire 2018 in Düsseldorf, Hall 12, Stand 12E72
Industrial coding and marking solutions for demanding production environments
Wiedenbach Apparatebau GmbH, Germany
» VIEW ALL NEWS «