« BACK  

First presentation of ISA-BRAZE® at Schweißen & Schneiden 2017

The ISA-BRAZE® high-temperature solders ensure excellent resistance and corrosion resistance under extreme conditions
The ISA-BRAZE® high-temperature solders ensure excellent resistance and corrosion resistance under extreme conditions

Other field of application
The ISA-BRAZE® solders are suitable for gap soldering, braze soldering and surfacing by soldering. For example, they can be used to combine components with each other for energy technology, electrical engineering and electronics where a good current flow must be ensured when transitioning from one part to another. In the tool industry, these solders can be used to attach blades or other functional elements made of hard metal to carrier materials. These solders can also be used to reliably produce highly stressed components from the aforementioned materials for engine technology, heating and cooling technology, industrial fittings and pipeline systems or for vehicle construction.

High-temperature solder ISA-BRAZE®
ISA-BRAZE® is an alternative in joining and connection technology. It is significantly "lower spatter" compared to standard wires with arc applications and is ideal for flux-free applications using inert gas. It can also be used as a functional material for coatings since it is suitable for gap soldering, braze soldering and surfacing by soldering. In the three available versions of ISA-BRAZE®970, ISA-BRAZE®970 Si and ISA-BRAZE®980, the digits refer to the solidus temperature in °C, which identifies the temperature, below which the alloy is completely in the solid phase.

Advantages of the vacuum procedure
Due to the production in the vacuum furnace, the ISA-BRAZE® alloys have an extremely high degree of purity of ≤ 0.15w%. This forms the basis for the best physical and chemical properties, since gas and non-metallic inclusions are minimal, for example. The alloys are thus extremely corrosion and oxidation resistant. The thermal conductivity, the electrical conductivity, the specific electric resistance, the thermal stress and the temperature coefficient are positively influenced by the high degree of purity of the alloys. Very homogeneous and clean soldering joints or coatings are created by the vacuum procedure.

Delivery forms
ISA-BRAZE® high-temperature solders are delivered in the form of wires and rods in the dimensional range from 0.5 to 3.0 mm Ø and are also available in the form of rings, punched parts and bent parts, flat wires and strips. Customer-specific designs are also available.

First presentation of ISA-BRAZE® at Schweißen & Schneiden 2017
Over 1,000 exhibitors from 40 countries will be at the international specialized trade fair Schweißen & Schneiden 2017 in Düsseldorf (host: Trade Fair Essen). Isabellenhütte Heusler will also be represented this year for the first time as an exhibitor in order to present the new ISA-BRAZE® alloys to the specialized audience.

Please visit us:
Isabellenhütte Heusler GmbH & Co. KG is exhibitor at the Schweißen & Schneiden 2017 in Düsseldorf Hall 12, Booth 12A95

PUBLISHED: 25 Sep 17 Bookmark and Share
Company:
Isabellenhütte Heusler GmbH KG
Country:
Germany
Tel:
+49 2771 9340
Fax:
+49 2771 23030
Email:
info@isabellenhuette.de
Website:
www.isabellenhuette.de
Other News from Isabellenhütte Heusler GmbH KG:

»
First presentation of ISA-BRAZE® at Schweißen & Schneiden 2017
»
Isabellenhütte Heusler unveils half-Heusler pilot production
»
ISA-CON® wires: good electrical conductivity and high tensile strength


Industry News:
David Lee will fully retire from Metalube in August 2018
Metalube bids farewell to David Lee
Metalube Limited, UK
Wire cleaned for decorative finish by PWC system
Wire green cleaning for plating and a decorative glossy finish
Decalub, France
Klaus Lenz - CEO of Ungerer Technology GmbH
Klaus LENZ has been appointed as the CEO of UNGERER Technology GmbH
Ungerer Technology GmbH, Germany
The cover page of
Digitized wire & cable manufacturing - The "NIEHOFF Magazine" 1/2018 is out now
Maschinenfabrik Niehoff GmbH & Co KG, Germany
Magnet assemblies can now be fabricated quickly and efficiently using a robot
Robot for magnet assemblies
Goudsmit Magnetics Group, Netherlands
From top: Multiwire drawing line type MMH 121 + RM 161; D 632 type double twist bunching machine; NPS double spooler type SV 402 D; 
Rotary braiding machine BMV 16 ; Rotary braiding machine BMV 16 (interior)
Digitization - Niehoff at wire 2018
Maschinenfabrik Niehoff GmbH & Co KG, Germany
The Strand Compaction Units are available for 2mm to 40mm strand diameters
Rope strand compaction gives Bar Products & Services a first quarter boost
Bar Products & Services Ltd, UK
Ridgway are manufacturers of precision taping and winding machines for the electrical and energy industries
Ridgway Machines moving forward and expanding
Ridgway Machines Ltd, UK
Wire & Plastic Machinery booth from Wire Expo 2016
Wire and Plastic Machinery at Wire Expo 2018
Wire & Plastic Machinery Corp, USA
Domino (Wiedenbach) will be showcasing intelligent coding and marking solutions at wire 2018 in Düsseldorf, Hall 12, Stand 12E72
Industrial coding and marking solutions for demanding production environments
Wiedenbach Apparatebau GmbH, Germany
» VIEW ALL NEWS «