« BACK  

Wire and rod dry cleaning at extreme speed

Wire cleaning by BH-S system
Wire cleaning by BH-S system

The BH-S is a green, dry cleaning process of great potential used in-line in the most demanding applications, allowing the highest cleaning speed with all steel wires and rods (including 0.90%C), mechanically descaled or acid cleaned, bare or pre-coated, drawn with calcium and sodium lubricants.

Applications include wire rod cleaning (rust and scale removal) prior to drawing and wire cleaning from solid lubricant residue, or other contaminants, prior to metallic coating, heat treatment, etc.

Development of the BH-S rod and wire dry cleaning system provides the ultimate combination of simplicity and effectiveness, replacing the most costly operations in the wire cleaning process, including replacement of acid, ultrasonic and other wet chemicals, generating substantial cost savings, environmental benefits and improvement in productivity of clean H/C and L/C wires.

The BH-S system is particularly recommended for cleaning applications in which a conventional process is inappropriate, especially with wires drawn upon severe conditions resulting in increased heat and burned lubricant tightly bound to the wire surface and embedded in micro-cavities.

Basically, the BH-S is a smooth and sensitive multi-layer micro-shaving/ abrading that finely impacts rod or wire surface separating scale, rust or lubricant residue from base material, evacuating away dispersed contaminants by moving wire rod, exiting the unit extra clean of white-metal appearance at extreme speed, operating at virtually zero energy consumption.

The BH-S units can be used in all positions – horizontal, vertical or inclined.

PUBLISHED: 01 Nov 17 Bookmark and Share
Company:
Decalub
Country:
France
Tel:
+33 1 64 26 20 66
Fax:
+33 1 60 20 20 21
Email:
info@decalub.com
Website:
www.decalub.com
Other News from Decalub:

»
Wire green cleaning for plating and a decorative glossy finish
»
Rod PDH coating - the new world of wire drawing
»
Wire and rod dry cleaning at extreme speed
»
Rod rust removal - dry, green and clean
»
Die wear - way to eliminate it
»
PDH dies can have infinite life - capture and removal of lubricant contaminants
»
Wire green cleaning for plating and decorative bright finish
»
Rod phosphate-free conversion coating - green, at unlimited speed and frictionless
»
Rod rust removal by captured scale - dry, green and clean
»
Wire green cleaning for plating and decorative bright finish
»
Wire dry cleaning enables direct galvanising
»
Rod scale and rust removal - acid-free, dry, green and clean
»
From drawn dull to wire clean reflective finish in plating quality
»
Rod preparation: Drawing art of steel wire - clean, green and dry
»
Wire dry cleaning enables direct galvanising
»
Wire cleaning: From drawn dull to wire clean glossy plating finish
»
Wire cleaning for plating quality
»
Wire cleaning provides glossy finish
»
Rod cleaning and coating for frictionless drawing
»
Wire green cleaning provides extra-clean wire in-line
»
Wire dry-cleaned to white metal at high speed
»
Wire cleaning for plating quality
»
Rod and wire green cleaning focuses on plating and galvanising
»
Rod scale removal, surface dry preparation and drawing at extreme speed
»
Wire cleaning and polishing for plating quality
»
Rod and wire lubrication problems eliminated
»
Extra clean wire at high speed
»
Wire green cleaning focuses on galvanizing
»
Cleaning system provides wire glossy finish
»
Acid-free rod dry cleaning, coating and drawing
»
Lubrication provides rod anti-friction coat at all speeds
»
Wire cleaning for galvanizing and plating quality
»
Rod dry cleaning by micro-abrading at 2.2 to 3.4 tonne per hour
»
Rod preparation: Dry vs wet. Anti-friction high melting lubricants eliminate wet pre-coating
»
Decalub at wire 2012
»
Rod dry cleaning: drawing speed continues to rise
»
Wire cleaning: Drawn wire in plating quality
»
It's a real clean-up...
»
Wire lubrication, high-melting lubricants
»
Rod dry preparation and direct drawing
»
Spring wire improved ductility
»
Bright reflective wire finish
»
Wire and rod dry cleaning
»
Wire friction, wear and lubrication
»
Wire lubrication system for frictionless drawing
»
Cleaning system provides wire glossy finish
»
Cleaning and lubrication of wire
»
Lubricant viscosity control to optimise wire drawing
»
Rod cleaning and preparation for high-speed drawing
»
Cleaning and preparation for frictionless drawing
»
Wire lubrication and cleaning
»
Wire with ‘new-coat’ in bright finish for plating quality
»
High speed dry cleaning for rod and wire
»
Lubricant viscosity control revolutionises wire drawing
»
Frictionless drawing of steel wire
»
Rod / wire drawing: Where the heat has gone?
»
Wire lubrication control eliminates pre-coating chemicals
»
Wire cleaning for plating quality
»
Rod and wire dry cleaning , in-line at high-speed
»
Rod dry preparation enables high-speed lfrictionless drawing
»
Wire cleaning for plating quality
»
Lubricant Viscosity Control Eliminates Pre-coating Chemicals
»
Frictionless drawing of High-Carbon wire
»
Wire Lubrication & Clean Wire
»
Acid-free rod cleaning and dry preparation for frictionless drawing


Industry News:
The Niehoff booth at the wire 2018 was always well-attended
Successful wire 2018, stable order situation, new projects
Maschinenfabrik Niehoff GmbH & Co KG, Germany
A magnetic timing belt feeds steel sheets in and out of a press at high speed
Handling of sheet metal in the automotive industry
Goudsmit Magnetics Group, Netherlands
Metalube gains OHSAS 18001 certificate
Hat Trick of Awards as Metalube gains OHSAS 18001
Metalube Limited, UK
Automotive Wire Extruder Group with 4 ROEX Extruders and a ROCOMAT - quick colour change system
Automotive wires - just-in-time and smart
Rosendahl Nextrom GmbH, Austria
Alloy Wire's stand at wire 2018
Wire 2018 lives up to expectations for AWI
Alloy Wire International, UK
Universal RX12 double use extrusion crosshead
Universal solution for building wire production
Rosendahl Nextrom GmbH, Austria
David Lee will fully retire from Metalube in August 2018
Metalube bids farewell to David Lee
Metalube Limited, UK
Wire cleaned for decorative finish by PWC system
Wire green cleaning for plating and a decorative glossy finish
Decalub, France
Klaus Lenz - CEO of Ungerer Technology GmbH
Klaus LENZ has been appointed as the CEO of UNGERER Technology GmbH
Ungerer Technology GmbH, Germany
The cover page of
Digitized wire & cable manufacturing - The "NIEHOFF Magazine" 1/2018 is out now
Maschinenfabrik Niehoff GmbH & Co KG, Germany
» VIEW ALL NEWS «